Anesthesia Machine with Ventilator (2 Vaporizers,3 Gas)

789,480.00 650,160.00

Return & Warranty

The warranty is limited to repair, parts replacement by JAGAS MEDICADENTA CORPORATION.

Warranty product will be null and void if:

  • The product is damaged physically
  • The product is repaired, maintained, modified, and disassembled
    Warranty limitation
  • Warranty product of product is limited to manufacturing defect
  • The warranty doesn’t cover replacement of product
  • Warranty doesn’t cover damages caused due to God and force majeure acts

Dent Art Instruments are warranted for one (1) year. If any of the instruments tarnish, break, chip or bend during any dental procedure. Jagas Medicadenta Corporation will replace the instrument at no charge.

Note:    Defective item must be returned to us for exchange via courier to Jagas Medicadenta Corp. with address #46 Filipinas Ave. Jagas Business Center, United Paranaque Subdivision 5, Sucat, and Paranaque City.

JAGAS MEDICA DENTA CORP (“JMDC”) hereby warrants its DENTAL CHAIR AND UNIT (“product”) free from any defect in the material and workmanship for a pe  riod of twelve (12) months or one (1) year from the date of installation and 3 months for Accessories (Light cure, Ultrasonic Scaler, High speed, and Low Speed).




This warranty covers defects in manufacturing discovered while using the product as recommended by JMDC. However, this warranty does not cover those defects of deficiencies (including failure to conform to products descriptions or specifications) which results, in whole or in part, from the following:

  1. Negligent or improper storage / handling of the product but the buyer;
  2. Failure of the buyer to prepare the site or provide the power requirement;
  3. Failure of the buyer to provide a good source of air and water for the delivery system (Doctor’s Unit) and to the cuspidor unit (Assistant Unit) resulting to blockages in the tubing, hose or fittings (water retracting valve), any service done will be at the buyers expenses;
  4. The absence of any component or accessory recommended by JMDC, but omitted at the buyer’s direction (ex. Air  filter Regulator and Water filter);
  5. Any alterations of the product by persons other than JMDC;
  6. Using incompatible or defective power supply;
  7. Improper use and maintenance of the product, or failure to comply with any application, instructions or recommendation of JMDC;
  8. Bulb and hand pieces; and
  9. Any other cause beyond reasonable control of JMDC.

After proper determination by JMDC that any of its products fail to meet any of the warranties above-mentioned within the applicable period, JMDC shall correct such defect either, at the following options:

  1. By repairing, adjusting, or replacing any defective product or components thereof; or
  2. By making available at the placed assembly necessary repairs or replacement parts or assemblies.
    Installation, troubleshooting, or repairs are included in this warranty

The remedies set forth herein are subject to the condition that the buyer shall promptly notify JMDC within the aforesaid period of any defects or deficiencies, Thereafter, the buyer shall make the product available for correction at a time and place mutually agreed upon.


Anesthesia Machine with Ventilator (2 Vaporizers,3 Gas)


AJ-2105 Anesthesia Machine, with its ergonomic design, integrates a concise and smooth structure and high mobility. The microcomputer-controlled Ventilator adopts exported sensors and other components. Its scientific and proper design as well as rigorous production process is what demonstrates the inner quality of Anjue products: mechanical ventilation is made secure and visible by the folded respiratory bellows, and the security of air supply is guaranteed by pneumatic transmission and measurement system. With multiple modern technologies applied, the Anesthesia Machine is both outstanding in performance and versatile in functions.

The Ventilator adopts microcomputer control with high-definition 8.4” TFT color LCD display, integrating the functions of respiratory control and displaying the monitoring parameters. It is versatile in function and excellent in performance.

The high-precision Vaporizer is designed with a stable concentration output, automatic compensation for pressure, temperature and flow rate. And it is available to choose two kinds of gas from Halothane, Enflurane, Isoflurane, and Sevoflurane, ensuring a successful anesthesia operation.

High-definition five-tube flowmeter (oxygen, nitrous oxide, and air), designed with stoppers for oxygen and nitrous oxide to control the output oxygen concentration.
Reliable pneumatic transmission system.
Economic and proper configuration of technologies, optional as required by the Customer.
Modularized design and upgrading. Upgrading is available as required by the Customer.

Part of Anesthesia Machine

  • Main body: High-strength engineering plastic rack, light,
    beautiful and corrosion resistant
  • Scope of application: adult, child
  • Gas source: O2: 0.27~0.55MPa    N2O: 0.27~0.55MPa
  • Flow meter: O2 : 0.1~1.0L/min   1.1~10L/min
  • N2O: 0.1~1.0L/min   1.1~10L/min
  • Air : 0.1~10L/min
  • O2, N2O linkage and N2O Stopper
    When using nitrous oxide, oxygen concentration>25%;
    When the oxygen pressure<0.2Kpa, the flow of nitrous oxide would be cut off.
  • Flow rate of rapid oxygen supply: 25~75L/min
  • Low oxygen pressure alarm: There will be sound alarm when the oxygen pressure < 0.2MPa
  • Vaporizer: It has the function of automatic compensation based on pressure, temperature, and flow rate. The regulation range of evaporator concentration is 0~5 vol%. Among Halothane,Enflurane, Isoflurane and Sevoflurane, two can be chosen for application as required by the customer. And vaporizers that are imported with original packaging are also available.
  • Respiratory circuit working mode: all-close, semi-close, semi-open
    APL: 0.5~7 kPa
  • Respiratory Bellows bellows for adults, tidal volume range: 0~1500 ml
  • bellows for children, tidal volume range: 0~300 ml
    anyone can be chosen for application as
    required by the customer

Part of Ventilator

  • Display mode: High-definition 8.4” TFT color LCD screen display
  • Venteilation  mod: IPPV, SIPPV, SIMV, PEEP, MANUAL,SIGH, IMV, VCV, PCV
    • Ventilation parameters  
      • Tidal volume  20~1500 ml
      • Rate         1~99 bpm
      • SIMV rate     2~20 bpm
      • I:E           4:1~1:8
      • Inspiratory trigger pressure   -1.0~2.0 kPa
      • PEEP         0~2.0 kPa
      • Pressure range 1.0~6.0 kPa
      • SIGH        1.5 times the inspiratory time
      • (70-150 adjustable)
      • Inspiratory platform  0~50%
      • Parameters for ventilation monitoring   tidal volume, ventilation volume, IPPV rate, SIMV rate, total respiratory rate, I/E, peak pressure of airway, average pressure, pressure – time waveform, flow rate – time waveform,PEEP,inspiratory trigger pressure, Inspiratory platform, autonomous inspiratory rate, lung compliance, airway resistance, flow-volume loop, pressure-volume loop
      • Monitoring of oxygen concentration     21%~100%
  • Security Alarm System
    • Oxygen Concentration alarm upper limit setting range:  21%~100%
    • low limit setting range: 10%~80%
    • Airway pressure alarm upper limit setting range:  0.3~6.0 kPa
    • low limit setting range: 0.2~5.0 kPa
    • Per-minute ventilation volume alarm upper limit setting range: 3.0~30L/min
    • low limit setting range: 1.0~10L/min
    • Sustained high-pressure alarm    it will give alarm when stress have consistently been higher than 2.5 kPa
    • Suffocation alarm it will give sound and light alarm if there is no tidal volume input for 15 seconds

Power alarm

  • Power: AC 220V±10%     50Hz±1Hz(UPS, Storage battery)
  • (Mechanical Arms)
  • (End-expiratory CO2 monitoring)
    *Items within brackets are optional.

Loan Form

Additional information

Weight 190 kg

Subscribe and be the first to get great deals!

2019 Powered by Endsofttech Web Solutions – To God Be The Glory